Bringing Digital Manufacturing to Market

By Nicole Hemsoth

October 6, 2010

Last week in Washington, D.C., the National Center for Manufacturing Sciences (NCMS) and Intersect360 Research presented the results of a survey based on over 300 manufacturing firms in the United States about the current state of digital manufacturing technologies.  More specifically, the questions were aimed at ultimately identifying the key barriers and drivers for their adoption of complex technologies to drive innovation.

While we will touch on some of the findings of the research and its potential implications in a while, it should come as no surprise that the “missing middle” designation became a key, guiding phrase. Many in the HPC community have already heard this term repeated elsewhere, it is not always a common, understood concept for those who hold the purse strings—namely representatives in the U.S. government, some of whom might not have even been familiar with the broad domain of high-performance computing and the many layers of meaning and technology that comprise it.

The goal of the research and presentation was to convince government leaders of the inherent value of making high-performance computing software and resources accessible to the manufacturing sector from the bottom up. Without having access to core technologies, particularly in the realm of modeling and simulation, many smaller design and manufacturing shops have a hard time remaining competitive—and we all know what this “trickle up” impact is on the national economy.

Again, chances are you’re well aware of the concept of the missing middle, but let’s take it one step further and enter the realm of manufacturing, HPC and this presumably vast, lost subset of the HPC-denied American economy.

The Digital Manufacturing Angle

The concept of digital manufacturing itself can appear, at first, as a bit too broad or nebulous, in part because from first glance, it implies that the final product is digital in nature or otherwise not tangible enough to apply to something as solid as manufactured products. Digital manufacturing, however, refers to the entire lifecycle of a design or product that was based on the use of advanced computational resources and technologies to deploy simulation and modeling for multiple aspects of the design and development process. As Intersect360 Research notes, “by creating a digital model of a product, a manufacturer can perform a wide range of tests, such as manufacturability analysis or performance testing, before physically building a new design.” It is in this total solution based on technology that digital manufacturing as a term is best applied.

What this overarching concept of digital manufacturing ultimately means is that companies who feed the manufacturing supply chain are able to improve their final product through refined design and testing efforts and furthermore, many are able to speed the time to market for their products since testing engineered parts or complete products can be time-consuming and expensive.

One of the better ways to think about digital manufacturing is to consider it in the case of a manufacturing firm at the top of the food chain, heavy-equipment maker Caterpillar.

Feeding a Caterpillar

Although not a missing middle company by any stretch of the imagination, providing an overview of how HPC does work for refining the product lifecycle (and the challenges that are present when the HPC absent from it) can almost be better realized via a case study of a company that is thriving versus one of the many missing middles who plod along with legacy systems and 2D rendering software. After all, we know what their challenges are.  But for a massive manufacturer who has both high-end systems yet still occasionally resorts to older, more expensive testing and design methods, we have a more thorough perspective.

Fortune 50 heavy equipment manufacturer Caterpillar’s research program manager for virtual products, Keven Hoftstetter, highlighted the key benefits and challenges of modeling and simulation for the company’s product cycle and bottom line last week during the manufacturing and HPC-related HPC 360 event in Champaign-Urbana, Illinois. The equipment manufacturer is a top-tier user of HPC, thus they certainly do not fall into the “missing middle” that has been clearly defined for the manufacturing sector and includes the smaller firms that support the supply chain that migrates to a summit that would include a company like Caterpillar.

Caterpillar is a company on the bleeding edge of modeling and simulation for manufacturing, both on a software and hardware/GPU level. Caterpillar places significant emphasis on research and development projects to helps refine product development and bring their line of equipment to customer as well as environmental standards. In addition to the core elements of their manufacturing business, they also house other broad divisions handling equipment financing, logistics, and remanufacturing/rebuilding.

As one might imagine, Caterpillar’s needs go far beyond modeling or simulating the machine functions since there are many parts that are required in advance, all of which much operate a peak performance, both individually and inside the specific machine. Accordingly, research and development at Caterpillar is the backbone of profitability on the micro level (testing pistons, for instance) to the macro level (making sure an earth moving vehicle performs on target).

While Caterpillar’s basic product cycle model is the same as many other manufacturing companies (concept; design, then on to the build and test phase, and finally the production phase) the products that they are developing and testing are on the massive scale. It is not feasible to build giant centers to house and test the actual prototypes in a repeated, 24×7 manner as they have been doing before taking advantage of simulation to handle their design and test process. Hoftstetter noted that they built a 10-acre facility to test their earth moving equipment but if they had to continue to build out centers like this they would be unable to compete.

Caterpillar also devotes a significant amount of time and resources into the many parts and components that are critical to their earth moving equipment. For instance, Hofstetter noted that since they are a leader in diesel and natural gas engines and industrial gas turbines a great deal of their research and development efforts are related to computational fluid dynamics and combustion system interaction.

Since it would not be viable for a company like Caterpillar, who sits at the top of the supply chain and has far more resources to continue to competitively develop and test its products without sophisticated modeling and simulation software and the resources required to power it, why would it make sense to think that smaller companies who help drive Caterpillar by providing components of its larger parts and final products can scavenge enough resources?

Since it all feeds into the top, if there could be a way to empower those at the lower end of the supply chain, let’s say a small engine parts maker for Caterpillar, why wouldn’t it make sense to encourage this? Let’s say for example this small, hypothetical parts design and manufacturing company could deliver high-quality products at a lower cost to Caterpillar, all due to a dramatic reduction in development and time-to-market periods because of the boost of added HPC capacity or even first-time HPC software and resource capability?

This is what lies at the heart of all of these “missing middle” debates, yet still there are no answers on how to best reach out to these smaller providers of manufactured designs and products when all they really need are the resources. And as you know, these are some very expensive resources we’re talking about here.

While HPC on demand providers are putting themselves forward as the next best thing to an in-house cluster, there are still hefty software license issues to contend with that will still drive up the cost. On the other but related side, there are cloud services providers boasting superior services with a performance hit that won’t (they will promise) be dramatic.

While nothing seems to appeal to most quite like the good old workstation for modeling and simulation tasks and since the GPU revolution is still just in its infancy in terms of HPC resource providers with affordable solutions, one has to wonder how much longer this missing middle in manufacturing will remain lost.

Research in Context

So let’s get back to the Intersect360 and NCMS research that started this whole conversation in the first place. Actually, let’s back way up…

What is rather unique about the study was that the 321 respondents were not told that the survey had anything to do with HPC. As Addison Snell noted during a presentation similar to the one he gave in conjunction with NCMS in Washington, D.C. the day before, in order to take care of the sticky issue of sample bias, the focus was on technology as a general concept versus the far narrower HPC distinction.

This does mark the study as different from several others that have emerged that are distinctly related to high-performance computing. However, if potential respondents were asked to take the survey, even if there was the possibility of marking an answer “we do not currently use HPC,” they might be far less likely to objectively consider the questions.

As it stands, 80% of the respondents came from the industrial or commercial manufacturing space (with the remaining 20% in supporting roles in academia, trade organizations and the public sector) and those on the commercial end of the spectrum were asked additional questions related to product design and development and to what extent they were deploying available high-end technologies to aid in their efforts, among other related questions.

While the above numbers will do you far more good if you take time to unravel some of the study’s finer points (and the important elements have only been hinted at–there are a number of sub-issues) about the distribution of opinions about securing access to advanced technologies (don’t call them HPC resources if that makes it more palatable, of course) the main point is that there is a combination of general resistance and lack of insight about how these technologies can be leveraged (and to what benefit) for those in that missing middle of manufacturing.

What the research found was that “there is potential, untapped benefit to digital manufacturing technology usage among U.S. manufacturers, particularly small to mid-sized manufacturers. For these companies to get over the hurdles inherent to adoption of advanced technologies, they will seek partners and programs that mitigate risk and help defray costs so they can make investments required to improve their competitiveness technologically.”

Still, what gives some pause is to consider the inferior technology that is driving many manufacturers feeding the supply chain. If we see Caterpillar as a representative example of the power of having access to modeling and simulation, except of the vast scale, it’s pertinent to apply the example of them building a 10-acre facility to test pre-built testable equipment to run constantly for days on end when software might have taken over the task.”

Although companies further down the supply chain don’t have the same sized products or design challenges, this example reverberates—when scaled down, what many of these smaller companies are doing is the cost, time, and resource equivalent of the 10-acre test lot.

Subscribe to HPCwire's Weekly Update!

Be the most informed person in the room! Stay ahead of the tech trends with industry updates delivered to you every week!

Kathy Yelick on Post-Exascale Challenges

April 18, 2024

With the exascale era underway, the HPC community is already turning its attention to zettascale computing, the next of the 1,000-fold performance leaps that have occurred about once a decade. With this in mind, the ISC Read more…

2024 Winter Classic: Texas Two Step

April 18, 2024

Texas Tech University. Their middle name is ‘tech’, so it’s no surprise that they’ve been fielding not one, but two teams in the last three Winter Classic cluster competitions. Their teams, dubbed Matador and Red Read more…

2024 Winter Classic: The Return of Team Fayetteville

April 18, 2024

Hailing from Fayetteville, NC, Fayetteville State University stayed under the radar in their first Winter Classic competition in 2022. Solid students for sure, but not a lot of HPC experience. All good. They didn’t Read more…

Software Specialist Horizon Quantum to Build First-of-a-Kind Hardware Testbed

April 18, 2024

Horizon Quantum Computing, a Singapore-based quantum software start-up, announced today it would build its own testbed of quantum computers, starting with use of Rigetti’s Novera 9-qubit QPU. The approach by a quantum Read more…

2024 Winter Classic: Meet Team Morehouse

April 17, 2024

Morehouse College? The university is well-known for their long list of illustrious graduates, the rigor of their academics, and the quality of the instruction. They were one of the first schools to sign up for the Winter Read more…

MLCommons Launches New AI Safety Benchmark Initiative

April 16, 2024

MLCommons, organizer of the popular MLPerf benchmarking exercises (training and inference), is starting a new effort to benchmark AI Safety, one of the most pressing needs and hurdles to widespread AI adoption. The sudde Read more…

Kathy Yelick on Post-Exascale Challenges

April 18, 2024

With the exascale era underway, the HPC community is already turning its attention to zettascale computing, the next of the 1,000-fold performance leaps that ha Read more…

Software Specialist Horizon Quantum to Build First-of-a-Kind Hardware Testbed

April 18, 2024

Horizon Quantum Computing, a Singapore-based quantum software start-up, announced today it would build its own testbed of quantum computers, starting with use o Read more…

MLCommons Launches New AI Safety Benchmark Initiative

April 16, 2024

MLCommons, organizer of the popular MLPerf benchmarking exercises (training and inference), is starting a new effort to benchmark AI Safety, one of the most pre Read more…

Exciting Updates From Stanford HAI’s Seventh Annual AI Index Report

April 15, 2024

As the AI revolution marches on, it is vital to continually reassess how this technology is reshaping our world. To that end, researchers at Stanford’s Instit Read more…

Intel’s Vision Advantage: Chips Are Available Off-the-Shelf

April 11, 2024

The chip market is facing a crisis: chip development is now concentrated in the hands of the few. A confluence of events this week reminded us how few chips Read more…

The VC View: Quantonation’s Deep Dive into Funding Quantum Start-ups

April 11, 2024

Yesterday Quantonation — which promotes itself as a one-of-a-kind venture capital (VC) company specializing in quantum science and deep physics  — announce Read more…

Nvidia’s GTC Is the New Intel IDF

April 9, 2024

After many years, Nvidia's GPU Technology Conference (GTC) was back in person and has become the conference for those who care about semiconductors and AI. I Read more…

Google Announces Homegrown ARM-based CPUs 

April 9, 2024

Google sprang a surprise at the ongoing Google Next Cloud conference by introducing its own ARM-based CPU called Axion, which will be offered to customers in it Read more…

Nvidia H100: Are 550,000 GPUs Enough for This Year?

August 17, 2023

The GPU Squeeze continues to place a premium on Nvidia H100 GPUs. In a recent Financial Times article, Nvidia reports that it expects to ship 550,000 of its lat Read more…

Synopsys Eats Ansys: Does HPC Get Indigestion?

February 8, 2024

Recently, it was announced that Synopsys is buying HPC tool developer Ansys. Started in Pittsburgh, Pa., in 1970 as Swanson Analysis Systems, Inc. (SASI) by John Swanson (and eventually renamed), Ansys serves the CAE (Computer Aided Engineering)/multiphysics engineering simulation market. Read more…

Intel’s Server and PC Chip Development Will Blur After 2025

January 15, 2024

Intel's dealing with much more than chip rivals breathing down its neck; it is simultaneously integrating a bevy of new technologies such as chiplets, artificia Read more…

Choosing the Right GPU for LLM Inference and Training

December 11, 2023

Accelerating the training and inference processes of deep learning models is crucial for unleashing their true potential and NVIDIA GPUs have emerged as a game- Read more…

Baidu Exits Quantum, Closely Following Alibaba’s Earlier Move

January 5, 2024

Reuters reported this week that Baidu, China’s giant e-commerce and services provider, is exiting the quantum computing development arena. Reuters reported � Read more…

Comparing NVIDIA A100 and NVIDIA L40S: Which GPU is Ideal for AI and Graphics-Intensive Workloads?

October 30, 2023

With long lead times for the NVIDIA H100 and A100 GPUs, many organizations are looking at the new NVIDIA L40S GPU, which it’s a new GPU optimized for AI and g Read more…

Shutterstock 1179408610

Google Addresses the Mysteries of Its Hypercomputer 

December 28, 2023

When Google launched its Hypercomputer earlier this month (December 2023), the first reaction was, "Say what?" It turns out that the Hypercomputer is Google's t Read more…

AMD MI3000A

How AMD May Get Across the CUDA Moat

October 5, 2023

When discussing GenAI, the term "GPU" almost always enters the conversation and the topic often moves toward performance and access. Interestingly, the word "GPU" is assumed to mean "Nvidia" products. (As an aside, the popular Nvidia hardware used in GenAI are not technically... Read more…

Leading Solution Providers

Contributors

Shutterstock 1606064203

Meta’s Zuckerberg Puts Its AI Future in the Hands of 600,000 GPUs

January 25, 2024

In under two minutes, Meta's CEO, Mark Zuckerberg, laid out the company's AI plans, which included a plan to build an artificial intelligence system with the eq Read more…

DoD Takes a Long View of Quantum Computing

December 19, 2023

Given the large sums tied to expensive weapon systems – think $100-million-plus per F-35 fighter – it’s easy to forget the U.S. Department of Defense is a Read more…

China Is All In on a RISC-V Future

January 8, 2024

The state of RISC-V in China was discussed in a recent report released by the Jamestown Foundation, a Washington, D.C.-based think tank. The report, entitled "E Read more…

Shutterstock 1285747942

AMD’s Horsepower-packed MI300X GPU Beats Nvidia’s Upcoming H200

December 7, 2023

AMD and Nvidia are locked in an AI performance battle – much like the gaming GPU performance clash the companies have waged for decades. AMD has claimed it Read more…

Nvidia’s New Blackwell GPU Can Train AI Models with Trillions of Parameters

March 18, 2024

Nvidia's latest and fastest GPU, codenamed Blackwell, is here and will underpin the company's AI plans this year. The chip offers performance improvements from Read more…

Eyes on the Quantum Prize – D-Wave Says its Time is Now

January 30, 2024

Early quantum computing pioneer D-Wave again asserted – that at least for D-Wave – the commercial quantum era has begun. Speaking at its first in-person Ana Read more…

GenAI Having Major Impact on Data Culture, Survey Says

February 21, 2024

While 2023 was the year of GenAI, the adoption rates for GenAI did not match expectations. Most organizations are continuing to invest in GenAI but are yet to Read more…

The GenAI Datacenter Squeeze Is Here

February 1, 2024

The immediate effect of the GenAI GPU Squeeze was to reduce availability, either direct purchase or cloud access, increase cost, and push demand through the roof. A secondary issue has been developing over the last several years. Even though your organization secured several racks... Read more…

  • arrow
  • Click Here for More Headlines
  • arrow
HPCwire