HPCwire: Compilers and More: Precision and Accuracy

The Leading Source for Global News and Information Covering the Ecosystem of High Productivity Computing

HPCwire >> Features

May 11, 2007

Compilers and More: Precision and Accuracy

by Michael Wolfe, Compiler Engineer, The Portland Group

According to Wikipedia, precision is defined in engineering and science as the degree of agreement among a series of individual measurements or results. For instance, if I measure my height (nonmetrically) five days in a row and come up with 73.8", 73.5", 73.75", 73.7" and 73.6", I could state that I'm just over 6 feet tall. The precision of the measurements is about three tenths of an inch, the range of the measurements.

Accuracy is the degree of agreement of a measure value with the actual value. If you know the actual value, you hardly need to measure it, except perhaps to determine the accuracy of the measuring tool. If you don't know the actual value, you might infer the accuracy of the measurement from the precision of your measurements, if you believe your measuring tool is reasonably accurate. When asked, I usually say I'm 6'2" tall, which is reasonably accurate, though not exact.

In computing, we use precision in two ways. One is the number of bits in the representation of the mantissa of a floating point number; for instance, single-precision IEEE floating point gives 24 bits of precision (counting the hidden bit for normalized numbers), about 7 decimal digits; double-precision (or full precision, as numerical analysts used to call it) provides 53 bits of precision, about 15 decimal digits.

We also use precision as a measure of how many of these bits are correct. For instance, if I represent a very precise measurement of 1.000100 as a single precision number, then subtract 1.0 from that, the floating point result is 1.000000E-4; since the original measurement was only precise to seven digits, this difference is only precise to three digits, despite being represented with 7 digits. As another simple example, try summing 1/i in single precision where i ranges from 1 to 10,000,000; then sum the numbers in the other order, from 1/10,000,000 to 1/1; here, the answers differ in the second digit. The computations are mathematically identical, but computationally different, because of the limited accuracy of the computer floating point representation. The key is the order of computations can change the floating point answers, due to differences in the order and magnitude of rounding, itself due to the limited size of the representation. Numerical analysts earn a living determining how accurate and precise a computed answer is, and how to formulate the computation to improve accuracy and precision. The rest of us address the problem by going to double precision and hoping for the best.

It's well known that a compiler can change the order of computations, and yes, this can affect the answers delivered. This dates back at least to the early days of vectorizing compilers for the Texas Instruments ASC, Control Data Cyber 205, and Cray 1. The simplest example was the way a summation is accumulated in vector mode. In our simple example, we showed two orders (forward and backward). These vector computers accumulated some number of intermediate partial sums, then add up the partial sums for a final result. The Cray compiler, for instance, would accumulate a sum in groups of 64 partial sums, the length of the vector register. The Cyber 205 would accumulate eight partial sums, the pipeline depth of the floating point adder. In all cases, the compiler had a flag to preserve the same floating point computation order, but that could be significantly slower.

This is not just historically interesting; many current processors have multimedia or SIMD instruction set extensions, such as the SSE and SSE2 instructions on the Intel and AMD x64 processors. Current compilers use the same code generation scheme to vectorize summations as compilers did 30 years ago for vector machines, though the 'vector length' may be only 2 or 4, the size of the multimedia registers.

In addition, a language definition may allow some freedom of evaluation order. Fortran allows a compiler to evaluate any mathematically equivalent expression, provided that parentheses are not violated. C does not even protect parenthesized subexpressions, explicitly allowing reassociation and even redistribution of multiply over addition.

Why this matters

It's also well known that floating point operations, in spite of gigahertz clocks, functional unit pipelines and all the other architectural magic, are relatively slow. Multiplication is slower than addition, and division or square root is up to ten times slower than that. For those in the high performance world, reducing the multiply count, or replacing multiplication by addition, or, even better, replacing division by multiplication can give a big performance boost. It's hard to underestimate the importance of benchmark performance in the world of compiler and processor vendors, where bragging rights, pricing, and sales can all depend on a particular benchmark or suite.

So let's take the case of a particular benchmark, Gromacs, from the SPEC CPU2006 suite. This benchmark has a large number of single precision square root function calls, many of which are in the denominator, such as 1.0/sqrt(rsq11). Several current microprocessors have an instruction to approximate a single-precision inverse square root, such as the PowerPC (AltiVec), the Intel (SSE) and AMD (3D-Now! and SSE). In all cases, the instruction gives a low precision approximation, about half the number of bits. One Newton-Raphson iteration is enough to improve the result to full precision.

Such a technique is well known; the Cray 1 implemented a reciprocal approximate instead of a divide instruction, requiring the compiler to generate the Newton-Raphson iteration to generate a full precision result. This allowed divides to be vector pipelined without undue hardware requirements.

The performance of the square root and divide units are so slow that doing the reciprocal square root approximate instruction, followed by a Newton-Raphson iteration involving four multiplies and a substract, is still quite a bit faster. In some applications (graphics, for example), full precision may be overkill anyway, so perhaps the approximation by itself is sufficient.

So, all is well, right?

The problem is that one iteration of Newton-Raphson is enough to bring the approximation to full precision, except for the last ULP (unit in the last place) or two. This means that using the optimized code in this benchmark generates slightly different results than the standard code that uses a library or full-precision square root and divide instructions.

So, are the answers right or not?

This is tough question, perhaps one that doesn't make sense. Recall that there's a certain amount of roundoff error for any computer floating point arithmetic, so the answer is "wrong" whichever way you compute this value. Moreover, the computation is probably based on some initial data that was measured or approximated and so doesn't have that much precision to start with.

So, are the answers okay or not?

As long as the programmer and the user realize and agree with the limitations of the generated code, yes, they are okay. There are really only two problems. In the history of floating point arithmetic, we've had a myriad of floating point formats, from base 16 to two, with or without rounding, with wildly varying dynamic range. In the 1980s, IEEE sponsored an effort to standardize on floating point formats, which all current mainstream processors use. This means that the answers computed on one brand processor, be it AMD, IBM, or Intel, are going to be the same as on any other brand, such as Motorola, MIPS, or SPARC. But here, we're changing the computation, so the first problem is that answers on different hardware will be close, but may no longer be exactly the same.

The other problem has to do with the programmer and user agreeing with the limitations. Compilers that implement this performance optimization will enable or disable it under programmer control, usually with a command-line option (for those of us still using command lines). The issue is what's the default? Would you like to specify an additional option to relax the precision of these operations, or specify an additional option to maintain their precision? This is largely a marketing question, though having an option to 'maintain precision' makes one wonder what the default behavior is.

As with all SPEC CPU2006 benchmarks, Gromacs checks that the computed answers are correct. However, the check is weak enough that the reciprocal square root approximation is good enough; the Newton-Raphson iteration isn't even necessary. And yes, some of those SPEC submissions use this "optimization" in their peak numbers. Beware! Dragons lurk here!

Perhaps compilers could take another step and provide an option that would aggressively reorder and reassociate operations, and in general play heck with the floating point rounding properties of the program. If you run your program in standard and reordered mode and the answers are the same, you could have some degree of confidence that the language, the compiler, and the hardware did nothing bad to your computation (though the physics, of course, is up to you). However, if the answers differed wildly, then perhaps you need to bring in that numerical analyst to determine just what makes your program so sensitive.

As clock rates peak, we will explore ever more bizarre mechanisms to improve performance. There's a lot of buzz about GPGPUs (General Purpose computing on Graphics Processing Units), which are cheap and fast, but which don't (yet) implement all the IEEE rounding modes. We could quickly degrade into a world much like 20 years ago, where you must consider the hardware floating point representation and implementation before choosing your hardware.

Precision control can also affect performance. Recent numerical library work at Oak Ridge National Labs and the University of Tennessee uses the fact that single precision (32-bit) floating point operations run much faster than double precision on many current processors. The packed SSE instructions on the x64 processors, for instance, can do twice as many 32-bit operations per cycle. This encourages them to redesign their libraries to do the bulk of the work in single precision, then to use iterative refinement in double precision to provide a high precision result with low precision speed.

On the other hand, some scientists are concerned about how quickly roundoff error accumulates when performing peta-operations, perhaps reducing the number of significant digits to zero. Eighteen years ago, David Bailey and others predicted that IEEE double precision floating point would run out of bits as problem sizes increased, and suggested that hardware 128-bit floating point would be needed. Perhaps those SSE registers will soon be holding a single value.

-----

Michael Wolfe has developed compilers for over 30 years in both academia and industry, and is now a senior compiler engineer at The Portland Group, Inc. (www.pgroup.com), a wholly-owned subsidiary of STMicroelectronics, Inc. The opinions stated here are those of the author, and do not represent opinions of The Portland Group, Inc. or STMicroelectronics, Inc.

Article Tools

Share Options

(Digg, Technorati, more)

Subscribe

Subscribe to HPCwire

Discussion

There are 0 discussion items posted.

Join the Discussion

You must be a registered user in order to comment on HPCwire stories.

Members enjoy:

	Access to Special Content, including Podcasts, Webcasts, and Whitepapers and more!
	Ability to take an active role in the discussions that are shaping the HPC technology discipline!
	Special offers available only to HPCwire members!

Become a Registered User Today!

Registered Users Log in Here to Comment

Email Address:	Password (case sensitive)

Remember me	Forgot Password?

RSS Feeds

Feeds by Topic

Feeds by Industry

Feeds by Content Type

Top Headlines

Intel Partners See 'Easy' Upgrade Path With Xeon 5600 Chips

Mar 18 | ChannelWeb | Westmere parts already showing up in HPC machines. Read more...

AMD: OEMs primed for Opteron 6100s

Mar 17 | The Register | But what about the tier ones? Read more...

Arrival of the Desktop Supercomputer

Mar 17 | Cadalyst Magazine | A new generation of workstations is changing the nature of technical computing. Read more...

Scheduling HPC In The Cloud

Mar 17 | Linux Magazine | Latest iteration of Sun Grid Engine able to tap into Cloud. Read more...

Tailoring Medicine with Supercomputers

Mar 16 | Bio-IT World | Biotech firm builds genetic models from patient data. Read more...

Read more headlines...

Featured Whitepapers

Virtualization for Aggregation And The vSMP Architecture™

Jan 12 | | In-depth look at vSMP Foundation server virtualization technology, technical implementation, use cases and capabilities. The technical whitepaper provides an architectural overview and details on the three vSMP Foundation products: vSMP Foundation for SMP, vSMP Foundation for Cluster and vSMP Foundation for Cloud.

Copper Cable Technologies for High Performance Computing

Jan 18 | | This white paper discusses Gore’s copper cable assemblies, and how they continue to exceed the standards for providing reliable, cost-effective solutions for high-performance computer applications.

View the White Paper Library

Multimedia

Webcast: Virtualized Data Center Roundtable

Join this online panel discussion for live Q&A with leading industry experts, analysts, and end-users to discuss the latest innovations, best practices, barriers to implementation, and measurable benefits of server virtualization with a particular focus on today's real world solutions.

Webcast: Watch SC09 Birds of a Feather Video: Scalable Fault-Tolerant HPC Supercomputers

Learn about scalable fault-tolerant architectures and examples of energy efficient and scalable supercomputing clusters using dual QDR InfiniBand to combine capacity computing with network failover capabilities with the help of programming languages such as MPI and a robust Linux cluster management package.

Webcast: High Performance Computing for a Smarter Planet

LIVE@SCO9: The IBM team discusses new innovations in hardware, software and services that help clients better understand their workloads and get insight from their R&D efforts. Technology demonstrations include the soon-to-be-released Power7 HPC processor, the DCS990 system with 2.4 petabytes of storage, the xCAT management tool, secure HPC cloud computing and more. Winners of two HPCwire Readers' and Editors’ Choice Awards! Take the IBM virtual tour at SC09 or more information go online to: http://www-03.ibm.com/systems/deepcomputing/sc09.html