HPCwire: Formula One Team Makes Super Investment

The Leading Source for Global News and Information Covering the Ecosystem of High Productivity Computing

Leading HPC
Solution Providers

HPCwire >> Topic >> Deprecated Topics

March 07, 2008

Formula One Team Makes Super Investment

Because of the highly technical and extremely competitive nature of Formula One racing, high performance computing is now commonly used by most F1 programs worldwide. Aerodynamic engineering is a critical component of Formula One design, and CFD simulation on 3D virtual models greatly speeds up research and development by complementing the more expensive and time consuming wind tunnel testing. Besides accelerating aerodynamic design, CFD can also be used to optimize brake cooling, gas tank filling and other engine component cooling activities.

On Tuesday, Renault's Formula One team announced it had purchased a 38 teraflop Appro Xtreme-X2 supercomputer to upgrade its compute infrastructure. The new Opteron-equipped Xtreme-X2, which is scheduled to be installed at the company's Formula One CFD Centre in the UK at the end of June 2008, would represent the most powerful supercomputing cluster utilized by a Formula One team. In December of 2006, BMW Sauber F1 team announced it had deployed a 12 teraflop Intel Xeon-based system for its Formula One program; and an 8 teraflop supercomputer was installed by the AT&T Williams Formula One team in July 2007. If more powerful HPC systems are out there in the racing world, no one's talking about them.

The new Appro machine will be used by the ING-sponsored Renault F1 Team to run full-car simulations for their 2008 F1 R28 and 2009 R29 racing cars. We asked Bob Bell, technical director of the Renault F1 Team, to help fill us in on how the group intends to use the new supercomputer to gain an edge on the competition.

HPCwire: How long has the Renault F1 Team been using high performance computing to help design Formula One cars?

Bell: We have been using CFD since 1995, but only since 2004 have we seriously invested in an HPC facility dedicated to CFD. The high performance computing systems will form part of a dedicated resource that will be used for the aero design development of our F1 cars. In addition they will be available as part of a CFD Centre of Excellence for use within the Renault Nissan alliance.

HPCwire: What will the new Appro system enable you to do that you couldn't accomplish with your older HPC systems? How important are these systems becoming in Formula One racing?

Bell: The new system will increase by a factor of five our CFD computing capacity, allowing us to model the car's aerodynamics in much more detail and with results delivered in greatly reduced time frames. These systems are now vital for the successful design of a modern F1 car as they start to rival a wind tunnel (which is the traditional development tool) for productivity.

The transition to our CFD solution using Appro systems will allow us to rival a wind tunnel in terms of development productivity but in a much more cost effective way. Traditionally 90 percent of our aero development has been conducted using empirical physical testing in the wind tunnel. The principal advantage of CFD is that it provides an in depth understanding of vehicle aerodynamics whereas a WT simply provides lined performance measurements. The clusters will primarily boost our CFD capacity from a current 10 percent contribution to our aero development to at least 50 percent. A sizeable step forward to us.

HPCwire: At 38 teraflops, the new system represents the most powerful machine for a Formula One team. What kind of edge do you think this will provide for coming up with winning Formula One designs?

Bell: It will be a significant advantage in terms of the productivity and accuracy of our aerodynamic development program. There is a direct correlation between the number of CFD simulations we can run in any given time period and the on-track performance development of the car.

HPCwire: Will the new system be used by other groups at Renault, outside the Formula One team?

Bell: It is hoped that the new facility will become a center of excellence within the Renault-Nissan alliance for CFD technology. This will directly benefit road car aerodynamic development.

HPCwire: What application software will you be using to drive the CFD simulations?

Bell: We will primarily be using commercial CFD software from CD-Adapco and specialized software solutions developed as part of our partnership with Boeing.

HPCwire: When can we expect to see the first Formula One cars on the track that were designed with the help of the new Appro system?

Bell: It will affect the end of season development with the R28 and strongly influence the entire development of the R29, where completely new aerodynamic regulations will benefit the increase in our computational capacity.

HPCwire: Using the following criteria: initial system cost, operational cost, computing power, ease of deployment and use, system vendor support, upgradeability, reliability, and fault-tolerance in mind -- how would you rank them in importance when selecting an HPC system for your Formula One application?

Bell: Computing power - 1; reliability, fault-tolerance - 2; initial system cost - 3; operational cost - 4; upgradeability - 5; system vendor support - 6; and ease of deployment and use - 7.

In summary, it is performance, reliability, cost and operability.

One of the reasons to commit to a CFD facility like this was that it represents a higher rate of return on capital investment for an aerodynamic development tool. Although cost effectiveness was part of our decision-making process, the technical configuration of the cluster was paramount. Appro not only offered us a cost-effective solution, but in addition they improved on our required technical specification through better reliability, greater fault tolerance and redundancy, as well as more flexibility with regards to system scalability.

Article Tools

Share & Save Options

Discussion

There are 0 discussion items posted.

Join the Discussion

You must be a registered user in order to comment on HPCwire stories.

Members enjoy:

	Access to Special Content, including Podcasts, Webcasts, and Whitepapers and more!
	Ability to take an active role in the discussions that are shaping the HPC technology discipline!
	Special offers available only to HPCwire members!

Become a Registered User Today!

Registered Users Log in Here to Comment

Email Address:	Password (case sensitive)

Remember me	Forgot Password?

RSS Feeds

Feeds by Topic

Feeds by Industry

Feeds by Content Type

Feature Articles

The New Science of Visual Analytics

When Jim Thomas set out to find new ways to deal with the mountains of information our society generates, he didn't just create a new organization, he created a new science. In this article we'll take a look at how the National Visualization and Analytics Center is transforming the problem of finding needles in haystacks into an opportunity for a more secure future.
Read More...

The Week in Review

ORNL Jaguar doubles its performance; the SC08 Cluster Challenge is gearing up; the University of Central Florida uses Army dollars to purchase an IBM super; and IBM's RoadRunner prepares to break the petaflop barrier. John West recaps those stories and more in our weekly wrap-up.
Read More...

Revaluating FPGAs for 64-bit Floating-Point Calculations

We now have generally available 2.5 GHz quad-core Opterons and Virtex-5 LX330, SX95T and recently announced SX240T FPGAs. In addition to this, Xilinx is releasing a new version of their floating-point cores that reduces the amount of logic and DSP slices needed for building floating-point function units. Taken together it is time to revisit Opteron floating-point performance versus FPGA performance.
Read More...

Read more HPCwire features...

Top Headlines

Parallel Processing Calls for a Fortress Mentality

May 14 | InfoWorld | Sun Microsystems is taking the lessons learned from Java and applying them to the application development challenges of the high performance computing realm. Read more...

IBM Set to Test the Fastest Computer in the World

May 14 | Computerworld | IBM is assembling the final pieces of what they hope will soon become the world's most powerful supercomputer. Read more...

IBM Shifts Cell to 65 Nanometers

May 13 | EETimes | IBM Corp. has announced the next-generation version of its Cell processor, the first specifically geared for computer servers. Read more...

Record-Setting Simulations on Ranger Reconstruct the Reionization Era

May 12 | Texas Advanced Computing Center | In the coming months, Dr. Michael L. Norman of UCSD will use Ranger, the world's most powerful supercomputer for open-science research, to perform the largest cosmological simulation to date. Read more...

2 AMD Executives Out in Restructuring Amid Slump

May 12 | BusinessWeek | Two executives have left AMD, including the head of the slumping chip maker's microprocessor division, as the company tries to engineer a dramatic turnaround to fend off larger rival Intel Corp. Read more...

Read more headlines...

Multimedia

Podcast: Interview with Ben Bennett of ClearSpeed Technology

Today, HPC organizations are requiring substantially more floating point performance to solve real-world problems. In this podcast, Ben Bennett, ClearSpeed General Manager, discusses how acceleration technology can improve the overall performance of standard x86-based systems...