Visit additional Tabor Communication Publications
September 22, 2006
Lots of interesting news for the HPC crowd this week. SGI arranged for its return from bankruptcy; Intel made a splash with a breakthrough in silicon photonics; and two vendors introduced a couple of unique products. I got a chance to speak with a number of these companies about their news this week and they all had a good story to tell. I'll try to keep my kibitzing to a minimum and just give you the facts.
SGI, Take Two
After declaring bankruptcy last spring, Silicon Graphics is now just a few weeks away from joining the land of the solvent. On Tuesday, a U.S. bankruptcy court approved its Plan of Reorganization, setting the stage for the reemergence of the company sometime in early October. When the company restarts they'll have a new management team in place, headed by CEO Dennis McKenna, and a new board of directors.
With the backing of the new investors and some additional loans announced this week, the company plans to hit the ground running. "As we look at this emergence process, we will have completed, in essence, our financial re-engineering," said McKenna. "We will have eliminated our legacy debt and our overall cap[italization] position will have strengthened significantly."
"We expect to be profitable on an operation basis during our fiscal year 07," he added.
No doubt some of the SGI's customers were shaken by the company's descent into insolvency, but apparently no one panicked. "At first there was confusion at what all this meant and what risks were there," admitted McKenna. "The good news is that we haven't lost any customers through this process and they've been extremely supportive."
The company's strategy will be changing from an engineering-centric organization that produces products to a market-focused organization that produces solutions. In practical terms, this means that they'll be using their various hardware platforms to carry "application bundles" to their target markets. This is not so different from Linux Networx' strategy to provide more application-focused solutions.
But unlike Linux Networx, which will remain focused in the high performance technical computing market, SGI also intends to expand into the much larger enterprise business management market, where it hopes to leverage its expertise in high performance systems and large memory footprint architectures. New target applications will include real-time data warehousing, data mining, large-scale database management and digital media archiving/content management. SGI estimates the enterprise business market is around $60 billion, which dwarfs the company's traditional markets in defense and intelligence ($3.7 billion) science application ($7.1 billion) and engineering applications ($13.7 billion). In that sense, SGI's new approach seems closer to that of IBM, which fuels its HPC business from its enterprise computing base.
The high-end Altix blade servers, which were traditionally used for HPC, will now be targeted to Oracle and SAP database applications. McKenna says they've achieved 10X performance improvements with their newest Itanium(Montecito)-based platforms on these types of workloads. For time-sensitive results, performance improvements of this magnitude can create a unique opportunity for SGI.
McKenna also notes that the company now offers a "more meaningful product portfolio" than just the high-end platforms of the past. SGI will be selling servers at all price points: high-end (Altix 4700 blade, Itanium-based), mid-range (Altix 450 blade, Itanium-based) and value (Altix XE cluster, Xeon-based). In particular the new Woodcrest-based Altix XE system represents SGI's entry into the commodity cluster space -- a market which represents about half of all server sales. SGI intends to deliver optimized cluster systems with software tuned for particular application areas. SGI is also offering a wider range of storage hardware (NAS and SAN).
According to McKenna, their expanded offerings will enable the company to compete for 80 percent of their customers' IT budgets rather than just 20 percent. "In fact, today we have the most complete product portfolio in the company's history. And we've got a roadmap that further strengthens this portfolio to the strategic direction of the company."
I can't resist a little kibitzing here. For the time being at least, SGI is going to remain an Intel-only shop -- Itaniums or Xeons -- while almost every other server/cluster vendor offers AMD Opteron-based systems somewhere in their product lineup. Will an Intel-only approach work? Maybe they should ask Michael Dell.
Intel Goes Photonic
On Monday, Intel and the University of California, Santa Barbara (UCSB) announced that they have developed the first electrically pumped hybrid silicon laser, characterizing this as one of the last major hurdles in silicon photonics. By combining the light emitting properties of indium phosphide with high volume, low-cost features of silicon, they have constructed a laser that can be integrated onto a silicon substrate and drive chip-level optical communications.
Because of the current expense associated with with converting photons to electrons, and vice versa, optical communications are only cost-effective at distances greater than the scale of a computer system. The goal of the Intel/UCSB work is to "siliconize" photonics so that optical communications can achieve a cost basis that will allow it to be applied at the level of chips, boards and racks.
According to Mario Paniccia, director of the Photonics Technology Lab at Intel, the commercialization of this technology will give system designers the ability to converge communication and computing all on one platform. Integrating a CMOS silicon-based laser will enable the production of hundreds of lasers on a single chip. Intel and UCSB have currently demonstrated 10 Gb/s performance for a single laser. They are confident that they'll reach 40 Gb/s in the not-too-distant future. With 25 lasers at 40 Gb/s, that's a terabit of data per second. And that can be multiplexed into a single fiber.
"What this allows us to do is not only drive new ways of high performance computing (and/or computing in general) but also the ability to re-architect the systems," said Paniccia. He noted that with terabit optical links, system designers would be free to move system components, like memory, further away from the CPU, enabling much more architectural freedom.
The Intel/UCSB team emphasized that this is a research breakthrough, not a commercial demonstration. A lot of work remains to bring it to commercial production. Paniccia estimated that this technology should be ready for prime time at some point in the early part of the next decade.
Intel isn't the only company working to siliconize optical communications. Luxtera, a fabless semiconductor startup company in Carlsbad California, has developed CMOS photonic transceivers. Its roadmap for bringing photonics to the chip is somewhat different than Intel's.
"Intel has taken the approach that this stuff won't work until the lasers are integrated into the silicon," said Alex Dickinson co-founder, president and CEO of Luxtera. "We think that's a fabulous long-term goal and we applaud any efforts in that area. The challenge in that area is manufacturability."
Dickinson believes integrating the indium phosphide lasers onto the chip may not be the best approach since this introduces a non-standard semiconductor manufacturing process into the mix. Luxtera's philosophy is to view the laser as you would a DC power supply: a source of energy, in this case photons. So they've mounted external lasers onto the silicon to drive their CMOS optical components. Luxtera has demonstrated their photonic solution, which is now being evaluated by Sun and other system vendors. They are looking at commercial deployments within the year.
But Dickinson admits the company is hedging its bets. Luxtera is currently involved in academic partnerships, with funding from DARPA's Electronic Photonic Integrated Chip (EPIC) program, in an effort to develop their own version of on-chip lasers. It's possible they will have an integrated silicon-based laser in the same timeframe as Intel's solution.
Stretching Those Cluster Interconnects
Optical interconnects may be the future, but don't throw out those copper cables just yet. On Monday, Quellan Inc. unveiled analog semiconductor devices that can be incorporated into copper interconnects, significantly enhancing their reach. The devices increase signal strength and reduce noise, providing more throughput and reach. And since the devices are very low power, they use much less energy than a standard 10 Gb/s interconnect, either copper or optical. Quellan calls this their Q:Active cable technology.
"There've been a lot of breakthroughs in the data center -- going from mainframes to blade servers, proprietary operating systems to open Linux, Intel to AMD, air cooling to water cooling, AC power distribution to DC power distribution," said Tony Stelliga, Chairman and CEO of Quellan. "But the cable or the interconnect has never really had a breakthrough improvement. It still burns hundreds of kilowatts, is still limited in reach, and it still weighs two to three tons. It really is time for a breakthrough in that space."
As data centers ramp up to 10 GbE and double data rate InfiniBand, the capital expense of the infrastructure and the operating expenses ramp up as well. A reach of ten meters using copper interconnects at single data rates (2.5 Gb/s) is reduced to five meters at double data rates (5 Gb/s).
"Going to fiber to reach 20 meters is just a waste of time, money and power, said Stelliga. "By embedding our active silicon, we can get that 10 meter radius to a 20 or 25 meter radius. As you can imagine, if you can double the reach of the cable you can get four times the compute density in that circle."
According to Stelliga, if you don't need to reach these longer distances you can use their devices to drop down to smaller cable sizes -- 30 gauge, which is the same diameter as CAT5 cable -- reducing weight and cost and improving the bend ratio. The smaller diameter cabling also allows better data center airflow for cooling. When 10 GbE over twisted pair becomes a ratified standard within the next couple of years, it will run on CAT7. The Q:Active technology offers a 10 GbE solution today that is much thinner than CAT7 and uses a fraction of the power.
The Q:Active technology also claims lower latency and lower power than either 10BaseT or optical. The Quellan devices avoid both the extra power and latency involved for the 10BaseT solution and the electrical to optical conversion that takes place with fiber.
PeakStream Goes With the Flow
A week after my commentary about the challenges of heterogeneous computing, a startup company named PeakStream unveiled its new software platform that targets simple hetero systems based on commodity multi-core and accelerator processors. Their "PeakStream Platform" is designed to provide programmers with a software abstraction for x86 multi-core, GPU and Cell architectures.
Like everyone else, PeakStream has noticed that both Intel and AMD have been busy adding more cores to their processors. This year they'll have quad-core processors, and octa-cores within two years. And by 2010, the chip makers are expected to have processors with 16 or perhaps even 32 cores. At the same time, HPC users are being tempted by the exceptional price/performance in commodity accelerator processors like GPUs and the Cell processor. These devices are low-cost and ship roughly in the same kinds of volumes as commodity general-purpose processors. But the floating point performance of these accelerators tend to be an order of magnitude greater than a general-purpose processor.
"The main issue is that nobody knows how to take advantage of this parallelism very easily -- either on the main chip or the co-processor," says Michael Mullany, VP of Marketing at PeakStream. "The second thing is that co-processors are making a very big comeback. There's been a lot of work on using co-processors in high performance computing in the last couple of years. We think that the commodity co-processors that are out there, particularly GPUs and the Cell processor design are particularly interesting."
In fact, software platforms for multi-core processors are already beginning to go mainstream -- from industry-standard solutions like OpenMP to a variety of vendor solutions. What PeakStream brings to the table is support for commodity accelerators, alongside of multi-core x86 processor support.
Actually, the first version of the PeakStream Platform will support only AMD/Intel x86 multi-core processors and ATI R580 based boards -- Radeon X1900 XTX and variants. The company plans to add support for the Cell BE processor in a future release and expand GPU coverage over time. But PeakStream is clearly focused on commodity processor hardware. Things like the ClearSpeed co-processor are considered too low-volume for them at this point.
PeakStream's software abstraction is centered on (surprise) a stream programming model. It requires that the programmer use array objects and a parallel API within a conventional C/C++ environment. According to PeakStream, the API is modeled on standard HPC interface conventions, minimizing the learning curve for developers. A virtual machine is used to perform memory management and map the code onto the available parallel hardware. The model was designed to insulate the developer from hardware concerns. And the use of the virtual machine allows the resulting binaries to remain aloof from processor dependencies.
The company will mainly be targeting customers in defense (big on COTS technology), financial services, oil & gas and academia. The company believes their platform can be used to develop new HPC software as well for porting moderate-sized legacy codes (less than 100,000 SLOC) to the next generation of hardware.
"Pretty much every five to ten years, most of the code base gets rewritten to support a new processor," said Mullany. "This whole market has gone from Crays in the early 80s to propriety array processors in the early 90, then has moved to RISC machines in the mid-90s and to clusters in the early 2000s. This is market that is used to moving code around."
Rocky Mountain High Performance Computing
On September 18th through the 20th, government and industry leaders converged in Denver to attend the HPC User Forum. In this week's issue, we feature interviews with three of the speakers at the meeting: Horst Simon and David Probst, who offer two different perspectives on petascale computing, and Richard Walsh who discusses how the next generation of processors are being applied to high performance computing. The interviews were conducted by contributing editor Steve Conway as the presenters gathered their thoughts for the September meeting. See our special HPC User Forum section, "Denver Dialogue," in this week's edition of HPCwire.
As always, comments about HPCwire are welcomed and encouraged. Write to me, Michael Feldman, at email@example.com.
Posted by Michael Feldman - September 21, 2006 @ 9:00 PM, Pacific Daylight Time
Michael Feldman is the editor of HPCwire.
No Recent Blog Comments
In quieter times, sounding the bell of funding big science with big systems tends to resonate further than when ears are already burning with sour economic and national security news. For exascale's future, however, the time could be ripe to instill some sense of urgency....
In a recent solicitation, the NSF laid out needs for furthering its scientific and engineering infrastructure with new tools to go beyond top performance, Having already delivered systems like Stampede and Blue Waters, they're turning an eye to solving data-intensive challenges. We spoke with the agency's Irene Qualters and Barry Schneider about..
Large-scale, worldwide scientific initiatives rely on some cloud-based system to both coordinate efforts and manage computational efforts at peak times that cannot be contained within the combined in-house HPC resources. Last week at Google I/O, Brookhaven National Lab’s Sergey Panitkin discussed the role of the Google Compute Engine in providing computational support to ATLAS, a detector of high-energy particles at the Large Hadron Collider (LHC).
May 23, 2013 |
The study of climate change is one of those scientific problems where it is almost essential to model the entire Earth to attain accurate results and make worthwhile predictions. In an attempt to make climate science more accessible to smaller research facilities, NASA introduced what they call ‘Climate in a Box,’ a system they note acts as a desktop supercomputer.
May 22, 2013 |
At some point in the not-too-distant future, building powerful, miniature computing systems will be considered a hobby for high schoolers, just as robotics or even Lego-building are today. That could be made possible through recent advancements made with the Raspberry Pi computers.
May 16, 2013 |
When it comes to cloud, long distances mean unacceptably high latencies. Researchers from the University of Bonn in Germany examined those latency issues of doing CFD modeling in the cloud by utilizing a common CFD and its utilization in HPC instance types including both CPU and GPU cores of Amazon EC2.
May 15, 2013 |
Supercomputers at the Department of Energy’s National Energy Research Scientific Computing Center (NERSC) have worked on important computational problems such as collapse of the atomic state, the optimization of chemical catalysts, and now modeling popping bubbles.
05/10/2013 | Cleversafe, Cray, DDN, NetApp, & Panasas | From Wall Street to Hollywood, drug discovery to homeland security, companies and organizations of all sizes and stripes are coming face to face with the challenges – and opportunities – afforded by Big Data. Before anyone can utilize these extraordinary data repositories, however, they must first harness and manage their data stores, and do so utilizing technologies that underscore affordability, security, and scalability.
04/15/2013 | Bull | “50% of HPC users say their largest jobs scale to 120 cores or less.” How about yours? Are your codes ready to take advantage of today’s and tomorrow’s ultra-parallel HPC systems? Download this White Paper by Analysts Intersect360 Research to see what Bull and Intel’s Center for Excellence in Parallel Programming can do for your codes.
In this demonstration of SGI DMF ZeroWatt disk solution, Dr. Eng Lim Goh, SGI CTO, discusses a function of SGI DMF software to reduce costs and power consumption in an exascale (Big Data) storage datacenter.
The Cray CS300-AC cluster supercomputer offers energy efficient, air-cooled design based on modular, industry-standard platforms featuring the latest processor and network technologies and a wide range of datacenter cooling requirements.