Visit additional Tabor Communication Publications
September 10, 2008
WASHINGTON, Sept. 10 -- An international collaboration of scientists today sent the first beam of protons zooming at nearly the speed of light around the world's most powerful particle accelerator -- the Large Hadron Collider (LHC) -- located at the CERN laboratory near Geneva, Switzerland. The U.S. Department of Energy (DOE) and the National Science Foundation (NSF) invested a total $531 million in the construction of the accelerator and its detectors, which scientists believe could help unlock extraordinary discoveries about the nature of the physical universe.
Celebrations across the U.S. and around the world mark the LHC's first circulating beam, an occasion more than 15 years in the making. An estimated 10,000 people from 60 countries have helped design and build the accelerator and its massive particle detectors, including more than 1,700 scientists, engineers, students and technicians from 94 U.S. universities and laboratories supported by DOE's Office of Science and NSF.
"As the largest and most powerful particle accelerator on Earth, the LHC represents a monumental technical achievement," said U.S. Department of Energy Undersecretary for Science Raymond L. Orbach. "I congratulate the world's scientists and engineers who have made contributions to the construction of the accelerator for reaching this milestone. We now eagerly await the results that will emerge from operation of this extraordinary machine."
The first circulating beam is a major accomplishment on the way to the ultimate goal: high-energy beams colliding in the centers of the LHC's particle detectors. Beyond revealing a new world of unknown particles, the LHC experiments could explain why those particles exist and behave as they do. They could reveal the origins of mass, shed light on dark matter, uncover hidden symmetries of the universe and possibly find extra dimensions of space.
NSF has focused its support on funding university scientists who have contributed to the design and construction of the two largest detectors, CMS and ATLAS, and promoted the development of advanced computing innovations, essential to address the challenges posed by the enormity and richness of data to be accumulated. Continued support will enable scientists to optimize detector performance, successful data accumulation and sophisticated analysis, necessary for discovery.
"This national and international collaboration of unprecedented scope, and our investment in basic science, fundamental to the NSF mission, provide an exciting opportunity to solve some of the core mysteries of the universe," said Arden L. Bement, Jr., director of the NSF. "With the operation of the LHC, anticipation of transformative scientific discoveries soars to new heights."
DOE provided support for the design and construction of the ATLAS and CMS detectors through two DOE national laboratories -- Brookhaven National Laboratory in New York and Fermi National Accelerator Laboratory (Fermilab) in Illinois. While the construction was managed through Fermilab and Brookhaven, scientists and engineers at universities and other DOE national laboratories -- Argonne National Laboratory in Illinois and Lawrence Berkeley National Laboratory (Berkeley Lab) in California -- played key roles in the design and construction and are finalizing preparations to collect and analyze the data at the energy frontier. In addition, DOE supported about 150 scientists, engineers and technicians from three DOE national laboratories -- Brookhaven, Fermilab and Berkeley Lab -- that built critical components for the LHC accelerator. They are joined by colleagues from DOE's Stanford Linear Accelerator Center and Texas A&M University in ongoing accelerator R&D.
"The LHC is a discovery machine," said CERN Director General Robert Aymar, "its research programme has the potential to change our view of the Universe profoundly, continuing a tradition of human curiosity that's as old as mankind itself."
Source: U.S. Department of Energy
The Xeon Phi coprocessor might be the new kid on the high performance block, but out of all first-rate kickers of the Intel tires, the Texas Advanced Computing Center (TACC) got the first real jab with its new top ten Stampede system.We talk with the center's Karl Schultz about the challenges of programming for Phi--but more specifically, the optimization...
Although Horst Simon was named Deputy Director of Lawrence Berkeley National Laboratory, he maintains his strong ties to the scientific computing community as an editor of the TOP500 list and as an invited speaker at conferences.
Supercomputing veteran, Bo Ewald, has been neck-deep in bleeding edge system development since his twelve-year stint at Cray Research back in the mid-1980s, which was followed by his tenure at large organizations like SGI and startups, including Scale Eight Corporation and Linux Networx. He has put his weight behind quantum company....
May 16, 2013 |
When it comes to cloud, long distances mean unacceptably high latencies. Researchers from the University of Bonn in Germany examined those latency issues of doing CFD modeling in the cloud by utilizing a common CFD and its utilization in HPC instance types including both CPU and GPU cores of Amazon EC2.
May 15, 2013 |
Supercomputers at the Department of Energy’s National Energy Research Scientific Computing Center (NERSC) have worked on important computational problems such as collapse of the atomic state, the optimization of chemical catalysts, and now modeling popping bubbles.
May 10, 2013 |
Program provides cash awards up to $10,000 for the best open-source end-user applications deployed on 100G network.
May 09, 2013 |
The Japanese government has revealed its plans to best its previous K Computer efforts with what they hope will be the first exascale system...
May 08, 2013 |
For engineers looking to leverage high-performance computing, the accessibility of a cloud-based approach is a powerful draw, but there are costs that may not be readily apparent.
05/10/2013 | Cleversafe, Cray, DDN, NetApp, & Panasas | From Wall Street to Hollywood, drug discovery to homeland security, companies and organizations of all sizes and stripes are coming face to face with the challenges – and opportunities – afforded by Big Data. Before anyone can utilize these extraordinary data repositories, however, they must first harness and manage their data stores, and do so utilizing technologies that underscore affordability, security, and scalability.
04/15/2013 | Bull | “50% of HPC users say their largest jobs scale to 120 cores or less.” How about yours? Are your codes ready to take advantage of today’s and tomorrow’s ultra-parallel HPC systems? Download this White Paper by Analysts Intersect360 Research to see what Bull and Intel’s Center for Excellence in Parallel Programming can do for your codes.
In this demonstration of SGI DMF ZeroWatt disk solution, Dr. Eng Lim Goh, SGI CTO, discusses a function of SGI DMF software to reduce costs and power consumption in an exascale (Big Data) storage datacenter.
The Cray CS300-AC cluster supercomputer offers energy efficient, air-cooled design based on modular, industry-standard platforms featuring the latest processor and network technologies and a wide range of datacenter cooling requirements.