Visit additional Tabor Communication Publications
November 16, 2009
Steve Wallach, a supercomputing legend and recipient of the 2008 IEEE Seymour Cray Award, has participated in all 22 supercomputing shows. He is known for his contributions to high performance computing through the design of innovative vector and parallel computing systems. He is co-founder and chief science officer for Convey Computer Corp., a new company with a hybrid-core computer that marries the low cost and simple programming model of a commodity system with the performance of customized hardware architecture.
Never short on opinions, especially when it comes to high performance computing, Steve Wallach talked to HPCwire about the future of HPC and how lessons from the past can point the way for the future.
HPCwire: There's been a lot of talk about how recent architecture advancements will bring GPU computing into the mainstream for high performance computing with significant speedups and energy savings. You disagree. Why?
Steve Wallach: GPUs are an interesting technology and some applications will probably see significant speed-up, but I don't see them in the mainstream. Here's why: programmers will have to put in a lot of effort to get the speed-up. Real-world applications consist of millions of lines of code, and organizations have invested too much money in those programs. If you tell them they have to modify those programs to use your technology, you lose. And it's not just the software that has to be changed; it is the entire programming eco-structure: debuggers, profilers, and programming memory. Anything that disturbs those underlying realities is destined to become a niche player. This is the biggest difference between an accelerator and a coprocessor. A coprocessor is an extension to the instruction set and is part of the same environment. GPUs are not. A GPU consists of two different programming environments and you have to move the data back and forth between them to get the benefits. The host cannot see the memory of the GPU; there are two separate address spaces.
It's similar to what we saw with attached array processors in the 80s. What we saw back then that you had to explicitly move and manage the data -- which reduced programmer productivity, raised actual cost of ownership and ultimately reduced performance. Like back then, the GPU programming model is different from its host.
GPUs initially did not have ECC correctable memory, now they do. This, however, demonstrates their lack of general purpose computing requirements. You have to work hard to make it work and not every application is amenable. The memory structure of a GPU is meant to be optimal for sequential access, but many programs require non-unity stride which will reduce performance for those applications. Classical supercomputers from Cray, Convex, NEC, and Fujitsu had very high bandwidth, highly interleaved main memory. A GPU is not going to be a general-purpose or a wide-spread solution for technical and software reasons. You can only execute the "hot spot" on the GPU, for example, and still need a classical host like the x86. It is not an integrated system. And, as of now, GPUs do not support virtual memory.
The GPU is really just a contemporary version of an attached array processor. If you look at the last 30 years, the architectures that have succeeded in the long term have been the ones that are easiest to program and that fit into the current environment. New languages take time to be learned and adopted. Organizations can't hire the right people to program the machines. Each new full-time equivalent programmer who has to be hired can easily add $200,000 to $300,000 to the costs of the new system per year. This is not a new phenomenon; it has been true for the past few decades. The time to reconfigure is really expensive.
HPCwire: You've said that "software is the 'Trojan Horse' of high-performance computing." What do you mean by that?
Wallach: As an organization, you accept the hardware -- the horse -- and then the next day the software warriors pour out and devour your IT department. As technology enthusiasts, we get excited by new technologies based on peak performance micro-architecture and the software questions come later as well as questions about "how do I fit it into my environment?" and "will I be able to achieve this level of performance with my applications?"
This has been true for the last 30 and will be true for the next 30 years. If you go back to the 80s -- you had all kinds of interesting technologies like array processors and others, but the ones that had the best software succeeded such as Convex, Cray and Alliant. They succeeded because the programmer could leverage the technology for their FORTRAN and C environments. Integrated solutions like these succeeded and companies like CDC failed because their software was part of an anemic development environment. As another example from the past, the Japanese (Fujitsu and NEC) had exceptional software environments.
Fast forward to today. It's like déjà vu all over again. A lot of new technologies are evolving but are not dealing with the software environment. Previous FPGA vendors had this problem. They were not integrated with the host environment. Vector processors, such as ClearSpeed, have this problem and this is true of all accelerators and GPUs.
The GPUs have some great technologies for visualization, for example, but are not integrated. You have to learn how to program in new languages like CUDA and there aren't a lot of major applications written in CUDA. Programmers have to re-code or set up source translators that facilitate FORTRAN to CUDA. There are no translators for FORTRAN to assembly code and from a technical perspective it is much more efficient to go from FORTRAN to assembly code. Source to source translators are NOT as efficient as compilation to assembly code.
HPCwire: You talk about Convey's hybrid-core computer as being an application specific, low power node. What is the significance of this description to the market?
Wallach: In the past decade, every generation has added new, specific instructions to general purpose computers to speed performance. For example, the current x86 system enhances image processing and new instructions have been developed to enhance vector processing. Since clock cycles are basically flat, you will see the trend toward specific instructions built into the microprocessors increasing. If one instruction can replace 10 instructions, you will have reduced power for that application. Our view is that it is now time to step up and increase the functionality of this approach. We advocate having one instruction to replace 100 instructions. Now you don't have to rely on clock cycles to increase performance. You are relying instead on data and control paths. This approach is extremely useful for Convey and allows us to significantly increase performance while reducing power requirements, footprint and overall facility costs for a data center.
HPCwire: In order to be successful, do you think new computing paradigms need to leverage existing eco-structures like Linux and Windows?
Wallach: Absolutely. As I said before, new languages mean higher costs and lower productivity. In VC deals, whenever I hear that you have to program in a new language to make it work, I turn it down.
With new computing paradigms, you get several benefits when they leverage existing eco-structures like Linux and Windows. First off, they are more easily acceptable in the marketplace. If I'm the data center manager, I don't have to hire anyone new or have training for a new eco-structure. No need to program in OCCAM, for example. I call programs that don't take into consideration legacy systems and that are obscenely difficult to integrate, "pornographic" programs -- you can't always describe them exactly, but you know them when you see them. In 1984, I converted a FORTRAN program from CDC to ANSI FORTRAN to see what they were doing and it was awful. In the contemporary world, CUDA is the new pornographic programming language.
In addition, Windows and Linux allow for adoption of related technologies from other industries without changing the programming environment. Industry innovators such as the researchers at Lawrence Berkeley National Laboratory believe, for example, that future supercomputers will use the processors found in cell phones and other hand-held devices. Why? Because they use so little energy and have proven that they can handle sophisticated tasks (October 2009, IEEE Spectrum: "Low-Power Supercomputers" ). It is easy for the manufacturers to build chips designed for specific HPC applications just like they build different chips for each Smartphone brand. Chip manufacturers will also provide the software -- compilers, debuggers, profiling tools, even complete Linux operating systems -- tailored to each specific chip they sell which will make the new systems easy to integrate into a current environment.
HPCwire: Last year in HPCwire you said the future of HPC involves improved software, in particular more widespread use of PGAS languages and optical interconnects. Is this still the case?
Wallach: Yes. I believe the need for optical interconnects increases as we build large systems. The efficiency of scaling in parallel processing has to do with bandwidth and latency. Optical interconnects are much more efficient in terms of speed and power as compared to copper. PGAS (partitioned global address space) languages allow programmers a global view of their dataset and are much more efficient. PGAS languages also make it much easier to program highly parallel systems -- they are much better than MPI.
HPCwire: Speaking of software, where is Convey on its development of different software personalities?
Wallach: We are on track with our development of personalities. Convey's personalities are application architectures and instruction sets that support a wide array of application-specific solutions. Rather than develop hundreds of unique applications, we a creating a manageable number of personalities that can be leveraged in hundreds of different ways. We've shipped a range of different personalities for different customers, and we've got several others in development.
In the end, we anticipate developing around a dozen different core personalities. This is consistent with what leading researchers have determined, also. For example, in the study published by the University of California at Berkeley, "The Landscape of Parallel Computing Research: A View from Berkeley," researchers define what they call MOTIFs or computer application structures for HPC. They describe 13 computer application structures on the Y access with the X access representing a particular application and how it uses that structure. Berkeley's view is consistent with ours that there are approximately a dozen different personalities that cover the full spectrum of computing. In our development, we add a third element to the equation -- the memory system -- and see this as a three-dimensional grid. For this case, a unity stride (access sequential elements -- dense data); or a highly interleaved (access non-sequential elements -- multiple independently accessible memory banks -- sparse data); or a "smart" memory (PIM - perform specific operations in the memory system -- thread based) system is required for optimal performance.
We are on track to have personalities with memory structure and instruction sets with these MOTIFs, which is where we believe computing is going. For the HC-1, we ultimately anticipate 13 MOTIFs -- but some will use the same personality.
HPCwire: Convey has just started shipping production units, can you tell us about the company's early customers and how they're using the HC-1?
Wallach: Early applications for the HC-1 follow the classic profile of HPC applications: signal-image processing, computer simulations, bioinformatics, and other applications we can't discuss at this time. We have HC-1s going into the world's leading research labs, all of which we will talk about during SC09 at our booth.
You can catch up with Steve Wallach during SC09, where he is participating in a talk on "HPC Architectures: Future Technologies and Systems" from 1:30-2:00 p.m. on Thursday (Rm. E143-144); or at Convey's booth (#2589).
Jun 18, 2013 |
The world's largest supercomputers, like Tianhe-2, are great at traditional, compute-intensive HPC workloads, such as simulating atomic decay or modeling tornados. But data-intensive applications--such as mining big data sets for connections--is a different sort of workload, and runs best on a different sort of computer.
Jun 18, 2013 |
Researchers are finding innovative uses for Gordon, the 285 teraflop supercomputer housed at the San Diego Supercomputer Center (SDSC) that has a unique Flash-based storage system. Since going online, researchers have put the incredibly fast I/O to use on a wide variety of workloads, ranging from chemistry to political science.
Jun 17, 2013 |
The advent of low-power mobile processors and cloud delivery models is changing the economics of computing. But just as an economy car is good at different things than a full size truck, an HPC workload still has certain computing demands that neither the fastest smartphone nor the most elastic cloud cluster can fulfill.
Jun 14, 2013 |
For all the progress we've made in IT over the last 50 years, there's one area of life that has steadfastly eluded the grasp of computers: understanding human language. Now, researchers at the Texas Advanced Computing Center (TACC) are utilizing a Hadoop cluster on its Longhorn supercomputer to move the state of the art of language processing a little bit further.
Jun 13, 2013 |
Titan, the Cray XK7 at the Oak Ridge National Lab that debuted last fall as the fastest supercomputer in the world with 17.59 petaflops of sustained computing power, will rely on its previous LINPACK test for the upcoming edition of the Top 500 list.
05/10/2013 | Cleversafe, Cray, DDN, NetApp, & Panasas | From Wall Street to Hollywood, drug discovery to homeland security, companies and organizations of all sizes and stripes are coming face to face with the challenges – and opportunities – afforded by Big Data. Before anyone can utilize these extraordinary data repositories, however, they must first harness and manage their data stores, and do so utilizing technologies that underscore affordability, security, and scalability.
04/15/2013 | Bull | “50% of HPC users say their largest jobs scale to 120 cores or less.” How about yours? Are your codes ready to take advantage of today’s and tomorrow’s ultra-parallel HPC systems? Download this White Paper by Analysts Intersect360 Research to see what Bull and Intel’s Center for Excellence in Parallel Programming can do for your codes.
Join HPCwire Editor Nicole Hemsoth and Dr. David Bader from Georgia Tech as they take center stage on opening night at Atlanta's first Big Data Kick Off Week, filmed in front of a live audience. Nicole and David look at the evolution of HPC, today's big data challenges, discuss real world solutions, and reveal their predictions. Exactly what does the future holds for HPC?
Join our webinar to learn how IT managers can migrate to a more resilient, flexible and scalable solution that grows with the data center. Mellanox VMS is future-proof, efficient and brings significant CAPEX and OPEX savings. The VMS is available today.