November 14, 2012
SALT LAKE CITY, Nov. 14 – The latest Green500 List was released today (http://www.green500.org/lists/green201211) and the top spots on the list have been taken over by machines that combine commodity processors with coprocessors or graphics processing units (GPUs) to form heterogeneous high-performance computing systems.
With all eyes on the new TOP500 number one system, Oak Ridge National Labs' Titan, it was a system belonging to a neighbor at the University of Tennessee that debuted at the top of the November Green500 List. The National Institute for Computational Sciences' Beacon system has set the new energy efficiency bar at nearly two-and-a-half billion floating-point operations per second (gigaflops) per watt. Employing Intel's Sandy Bridge series of Xeon central processing units (CPUs) and four of Intel's Xeon Phi coprocessors per node Beacon achieved a peak 112,200 gigaflops of performance running the LINPACK benchmark while consuming only 44.89 kW of power.
The Intel Xeon Phi – "Knights Corner" – is a 22nm multicore coprocessor featuring the world's first 3D Tri-Gate transistors. Like its GPU counterparts, the Intel Xeon Phi resides on a PCI Express board that plugs into a machine's expansion slots. However, unlike its GPU-based cousins, the Xeon Phi architecture provides a more tightly coupled instruction path for developers and delivers better energy efficiency.
Rounding out the top five systems are three other machines using GPU accelerators combined with traditional AMD or Intel CPUs. "Metaphorically, think of CPU-GPU systems operating like the human brain, where the CPU could be viewed as the left brain and the GPU as the right brain," says Dr. Wu Feng, founder of the Green500 List. "Each side of the brain is suited to process different types of tasks." In second place is the SANAM system from the King Abdulaziz City for Science and Technology, an Intel CPU system that uses AMD's new FirePro S10000 GPU accelerators, and in third and fourth are the Titan and Todi systems by Cray that employ AMD Opteron CPUs and nVIDIA Tesla K20 GPU accelerators. In number five is the previous Green500 List number one system, IBM's Blue Gene/Q that uses PowerPC BQC CPUs. All of these systems are over two gigaflops per watt.
Overall, the performance of machines in the Green500 List has increased at a higher rate compared to power consumption. "That's why the machines' efficiencies are going up," says Feng. "We are more performance for the same amount of power." For machines based on commodity components – machines built with off-the-shelf components – coprocessors and GPUs are attributing a great deal to the efficiency gains. So much so that they are keeping pace and in the latest list even outpacing purpose built systems like IBM's Blue Gene/Q. "Power consumption is still going up," says Wu, and that is still a concern.
The Green500 List has provided a ranking of the most energy-efficient supercomputers in the world since November 2007. For decades, the notion of "performance" has been synonymous with "speed" as measured in FLOPS. This particular focus has led to the emergence of supercomputers that consume egregious amounts of electrical power and produce so much heat that extravagant cooling facilities must be constructed to ensure proper operation. In addition, the emphasis on speed as the ultimate metric has caused other metrics such as reliability, availability, and usability to be largely ignored. As a result, there has been an extraordinary increase in the total cost of ownership (TCO) of a supercomputer.
-----
Source: Green500 List
The Xeon Phi coprocessor might be the new kid on the high performance block, but out of all first-rate kickers of the Intel tires, the Texas Advanced Computing Center (TACC) got the first real jab with its new top ten Stampede system.We talk with the center's Karl Schultz about the challenges of programming for Phi--but more specifically, the optimization...
Read more...
Although Horst Simon was named Deputy Director of Lawrence Berkeley National Laboratory, he maintains his strong ties to the scientific computing community as an editor of the TOP500 list and as an invited speaker at conferences.
Read more...
Supercomputing veteran, Bo Ewald, has been neck-deep in bleeding edge system development since his twelve-year stint at Cray Research back in the mid-1980s, which was followed by his tenure at large organizations like SGI and startups, including Scale Eight Corporation and Linux Networx. He has put his weight behind quantum company....
Read more...
May 16, 2013 |
When it comes to cloud, long distances mean unacceptably high latencies. Researchers from the University of Bonn in Germany examined those latency issues of doing CFD modeling in the cloud by utilizing a common CFD and its utilization in HPC instance types including both CPU and GPU cores of Amazon EC2.
Read more...
May 15, 2013 |
Supercomputers at the Department of Energy’s National Energy Research Scientific Computing Center (NERSC) have worked on important computational problems such as collapse of the atomic state, the optimization of chemical catalysts, and now modeling popping bubbles.
Read more...
May 10, 2013 |
Program provides cash awards up to $10,000 for the best open-source end-user applications deployed on 100G network.
Read more...
May 09, 2013 |
The Japanese government has revealed its plans to best its previous K Computer efforts with what they hope will be the first exascale system...
Read more...
May 08, 2013 |
For engineers looking to leverage high-performance computing, the accessibility of a cloud-based approach is a powerful draw, but there are costs that may not be readily apparent.
Read more...
05/10/2013 | Cleversafe, Cray, DDN, NetApp, & Panasas | From Wall Street to Hollywood, drug discovery to homeland security, companies and organizations of all sizes and stripes are coming face to face with the challenges – and opportunities – afforded by Big Data. Before anyone can utilize these extraordinary data repositories, however, they must first harness and manage their data stores, and do so utilizing technologies that underscore affordability, security, and scalability.
04/15/2013 | Bull | “50% of HPC users say their largest jobs scale to 120 cores or less.” How about yours? Are your codes ready to take advantage of today’s and tomorrow’s ultra-parallel HPC systems? Download this White Paper by Analysts Intersect360 Research to see what Bull and Intel’s Center for Excellence in Parallel Programming can do for your codes.
In this demonstration of SGI DMF ZeroWatt disk solution, Dr. Eng Lim Goh, SGI CTO, discusses a function of SGI DMF software to reduce costs and power consumption in an exascale (Big Data) storage datacenter.
The Cray CS300-AC cluster supercomputer offers energy efficient, air-cooled design based on modular, industry-standard platforms featuring the latest processor and network technologies and a wide range of datacenter cooling requirements.