Visit additional Tabor Communication Publications
December 03, 2012
SAN JOSE, Calif., Dec. 3 – PLDA, the industry leader in PCI Express IP solutions and GUC, the Flexible ASIC Leader, today announced successful test chips for the industry’s first combined PCIe Gen 3 Controller IP and PHY IP solution on TSMC 28nm HPM (High Performance Mobile) process. The combined PCIe 3.0 Controller/PHY solution is in initial production and has been incorporated into demo boards.
The TSMC 28nm HPM process offers significantly higher speeds, up to 40 percent lower power and better gate density compared to the 40nm node and is optimized for the requirements of high performance mobile devices. The ability to easily integrate a complete PCIe Gen 3 solution into end products is a significant milestone for developers of next generation mobile devices.
The PLDA XpressRICH3 IP is a high performance, low latency, highly-configurable PCI Express Endpoint, Root port, and Switch IP, compliant to the PCI Express rev.3.0 specification. It is also available with the industry-standard AMBA AXI4 interface under the version XpressRICH3-AXI.
GUC's PCIe Gen 3 PHY is designed for networking and high end computing SoC's. Based on GUC’s proven high-speed SERDES technology, the performance of PCIe Gen 3 PHY exceeds PCI Express Base Specification rev.3.0 while proving highly adaptable to any link/lane configurations.
“PLDA’s XpressRICH3 IP improves upon the leading architecture and reliability of previous generations of PLDA PCI Express interface IP and provides the performance and configurability necessary to take advantage of the benefits provided by HPM, while improving the design process for its global customer base,” stated Stephane Hauradou, CTO for PLDA.
“The GUC PHY supports the PCI Express protocol and signaling for designers working on high end computing and networking applications,” said Dr. Jen-Tai Hsu, Senior Director of R&D, GUC. “Its low-power and industry-leading small footprint provide the state-of-the-art flexibility required for the innovative 28nm HPM process.”
PLDA XpressRICH3 IP is available now from PLDA. The PHY IP is available now from GUC.
Evaluation boards with a single chip with PLDA’s PCIe 3.0 Controller and GUC’s PCIe 3.0 PHY combination are available for review now. Please contact PLDA to request an evaluation.
PLDA designs and sells intellectual property (IP) cores for FPGA and System-on-Chip (SoC) that aim to accelerate time-to-market for embedded electronic designers. PLDA specializes in high-speed interface protocols and technologies such as PCIe, and Ethernet.
PLDA IP cores are provided with a complete set of tools, including FPGA prototyping cards, drivers and APIs, testbenches and benefit from a global support and sales organization able to sustain over 2,000 ASIC customers worldwide.
About Global Unichip Corp.
GLOBAL UNICHIP CORP. (GUC), is the Flexible ASIC Leader who provides the semiconductor industry with leading IC implementation and SoC manufacturing services. Based in Hsin-chu Taiwan, GUC has developed a global reputation with a presence in China, Europe, Japan, Korea, and North America.
The Xeon Phi coprocessor might be the new kid on the high performance block, but out of all first-rate kickers of the Intel tires, the Texas Advanced Computing Center (TACC) got the first real jab with its new top ten Stampede system.We talk with the center's Karl Schultz about the challenges of programming for Phi--but more specifically, the optimization...
Although Horst Simon was named Deputy Director of Lawrence Berkeley National Laboratory, he maintains his strong ties to the scientific computing community as an editor of the TOP500 list and as an invited speaker at conferences.
Supercomputing veteran, Bo Ewald, has been neck-deep in bleeding edge system development since his twelve-year stint at Cray Research back in the mid-1980s, which was followed by his tenure at large organizations like SGI and startups, including Scale Eight Corporation and Linux Networx. He has put his weight behind quantum company....
May 16, 2013 |
When it comes to cloud, long distances mean unacceptably high latencies. Researchers from the University of Bonn in Germany examined those latency issues of doing CFD modeling in the cloud by utilizing a common CFD and its utilization in HPC instance types including both CPU and GPU cores of Amazon EC2.
May 15, 2013 |
Supercomputers at the Department of Energy’s National Energy Research Scientific Computing Center (NERSC) have worked on important computational problems such as collapse of the atomic state, the optimization of chemical catalysts, and now modeling popping bubbles.
May 10, 2013 |
Program provides cash awards up to $10,000 for the best open-source end-user applications deployed on 100G network.
May 09, 2013 |
The Japanese government has revealed its plans to best its previous K Computer efforts with what they hope will be the first exascale system...
May 08, 2013 |
For engineers looking to leverage high-performance computing, the accessibility of a cloud-based approach is a powerful draw, but there are costs that may not be readily apparent.
05/10/2013 | Cleversafe, Cray, DDN, NetApp, & Panasas | From Wall Street to Hollywood, drug discovery to homeland security, companies and organizations of all sizes and stripes are coming face to face with the challenges – and opportunities – afforded by Big Data. Before anyone can utilize these extraordinary data repositories, however, they must first harness and manage their data stores, and do so utilizing technologies that underscore affordability, security, and scalability.
04/15/2013 | Bull | “50% of HPC users say their largest jobs scale to 120 cores or less.” How about yours? Are your codes ready to take advantage of today’s and tomorrow’s ultra-parallel HPC systems? Download this White Paper by Analysts Intersect360 Research to see what Bull and Intel’s Center for Excellence in Parallel Programming can do for your codes.
In this demonstration of SGI DMF ZeroWatt disk solution, Dr. Eng Lim Goh, SGI CTO, discusses a function of SGI DMF software to reduce costs and power consumption in an exascale (Big Data) storage datacenter.
The Cray CS300-AC cluster supercomputer offers energy efficient, air-cooled design based on modular, industry-standard platforms featuring the latest processor and network technologies and a wide range of datacenter cooling requirements.