February 14, 2013
GENEVA, Feb. 14 – At 7.24am, the shift crew in the CERN Control Centre extracted the beams from the Large Hadron Collider, bringing the machine’s first three-year running period to a successful conclusion. The LHC’s first run has seen major advances in physics, including the discovery of a new particle that looks increasingly like the long–sought Higgs boson, announced on 4 July 2012. And during the last weeks of the run, the remarkable figure of 100 petabytes of data stored in the CERN mass-storage systems was surpassed. This data volume is roughly equivalent to 700 years of full HD-quality movies.
“We have every reason to be very satisfied with the LHC’s first three years,” said CERN Director-General Rolf Heuer. “The machine, the experiments, the computing facilities and all infrastructures behaved brilliantly, and we have a major scientific discovery in our pocket.”
The LHC now begins its first long shutdown, LS1. Over the coming months major consolidation and maintenance work will be carried out across the whole of CERN’s accelerator chain. The LHC will be readied for higher energy running, and the experiments will undergo essential maintenance. LHC running is scheduled to resume in 2015, with the rest of the CERN complex starting up again in the second half of 2014.
“There is a great deal of consolidation work to do on CERN’s whole accelerator complex, as well as the LHC itself,” said CERN’s Director for Accelerators and Technology, Steve Myers. “We’ll essentially be rebuilding the interconnections between LHC magnets, so when we resume running in 2015, we will be able to operate the machine at its design energy of 7TeV per beam”.
The LHC exceeded all expectations in its first three-year run, delivering significantly more data to the experiments than initially foreseen. Physicists measure data quantity in units known as inverse femtobarns, and by the time the last high energy proton-proton data were recorded in December, the ATLAS and CMS experiments had each recorded around 30 inverse femtobarns, of which over 23 were recorded in 2012.
To put this into context, the particle whose discovery was announced on 4 July 2012 was found by analysing around 12 inverse femtobarns. That means CERN’s experimental physics community still has plenty of data to analyse during LS1.
“There will be plenty of physics to do during LS1, and not only at the LHC,” said CERN Research Director Sergio Bertolucci. “The LHC is the flagship of CERN’s experimental programme, but is nevertheless just one component of a very varied research infrastructure. All of the other experiments here have on-going analyses, so I’m looking forward to many interesting results emerging as LS1 progresses.”
For the first weeks of 2013, the LHC has been colliding protons with lead ions as part of the programme to understand matter as it would have been just after the Big Bang. The last four days of the run saw a return to proton-proton collisions, this time at reduced energy. These collisions will provide useful data for interpreting the data recorded with lead ions. Single beam studies will continue until the weekend, when the process of bringing the LHC up to room temperature will begin, allowing LS1 work to get under way.
-----
Source: CERN
Large-scale, worldwide scientific initiatives rely on some cloud-based system to both coordinate efforts and manage computational efforts at peak times that cannot be contained within the combined in-house HPC resources. Last week at Google I/O, Brookhaven National Lab’s Sergey Panitkin discussed the role of the Google Compute Engine in providing computational support to ATLAS, a detector of high-energy particles at the Large Hadron Collider (LHC).
Read more...
The Xeon Phi coprocessor might be the new kid on the high performance block, but out of all first-rate kickers of the Intel tires, the Texas Advanced Computing Center (TACC) got the first real jab with its new top ten Stampede system.We talk with the center's Karl Schultz about the challenges of programming for Phi--but more specifically, the optimization...
Read more...
Although Horst Simon was named Deputy Director of Lawrence Berkeley National Laboratory, he maintains his strong ties to the scientific computing community as an editor of the TOP500 list and as an invited speaker at conferences.
Read more...
May 16, 2013 |
When it comes to cloud, long distances mean unacceptably high latencies. Researchers from the University of Bonn in Germany examined those latency issues of doing CFD modeling in the cloud by utilizing a common CFD and its utilization in HPC instance types including both CPU and GPU cores of Amazon EC2.
Read more...
May 15, 2013 |
Supercomputers at the Department of Energy’s National Energy Research Scientific Computing Center (NERSC) have worked on important computational problems such as collapse of the atomic state, the optimization of chemical catalysts, and now modeling popping bubbles.
Read more...
May 10, 2013 |
Program provides cash awards up to $10,000 for the best open-source end-user applications deployed on 100G network.
Read more...
May 09, 2013 |
The Japanese government has revealed its plans to best its previous K Computer efforts with what they hope will be the first exascale system...
Read more...
May 08, 2013 |
For engineers looking to leverage high-performance computing, the accessibility of a cloud-based approach is a powerful draw, but there are costs that may not be readily apparent.
Read more...
05/10/2013 | Cleversafe, Cray, DDN, NetApp, & Panasas | From Wall Street to Hollywood, drug discovery to homeland security, companies and organizations of all sizes and stripes are coming face to face with the challenges – and opportunities – afforded by Big Data. Before anyone can utilize these extraordinary data repositories, however, they must first harness and manage their data stores, and do so utilizing technologies that underscore affordability, security, and scalability.
04/15/2013 | Bull | “50% of HPC users say their largest jobs scale to 120 cores or less.” How about yours? Are your codes ready to take advantage of today’s and tomorrow’s ultra-parallel HPC systems? Download this White Paper by Analysts Intersect360 Research to see what Bull and Intel’s Center for Excellence in Parallel Programming can do for your codes.
In this demonstration of SGI DMF ZeroWatt disk solution, Dr. Eng Lim Goh, SGI CTO, discusses a function of SGI DMF software to reduce costs and power consumption in an exascale (Big Data) storage datacenter.
The Cray CS300-AC cluster supercomputer offers energy efficient, air-cooled design based on modular, industry-standard platforms featuring the latest processor and network technologies and a wide range of datacenter cooling requirements.