AMD and Ansys Help Significantly Speed Up New Product Designs Across Industries

April 19, 2021

PITTSBURGH, April 19, 2021 — AMD and Ansys are collaborating to help engineering organizations across every industry spur new product design by substantially improving modeling run times. Data centers powered by 3rd Gen AMD EPYC processors are enabling engineers to produce superior designs with unprecedented speed — delivering high quality products to rapidly address new market opportunities.

Engineers face increasing pressure to complete design cycle times sooner. However, a large portion of engineering simulations require overnight runs. The rising complexity of these simulation workloads increases the need for high-performance computing (HPC) resources, which increasingly rely on more performant parallel processing and processor architecture capabilities. Through internal testing, AMD demonstrated that its new EPYC 75F3 processors could reduce specific Ansys simulation runtimes by up to a factor of two.

AMDs new EPYC 75F3 processors speed up Ansys simulations, including crashworthiness simulations performed by Ansys LS-DYNA.

From improving the energy efficiency of gas turbines with Ansys’s computational fluid dynamics software to enhancing automotive safety with Ansys’s explicit dynamics software, AMD EPYC processors empower engineering teams to execute extreme scaling of computationally demanding applications and rapidly design leading-edge products. It is expected that Ansys simulations will soon run even faster with the upcoming U.S. Department of Energy’s exascale supercomputers, which will be built by Hewlett Packard Enterprise (HPE) and used by Frontier at Oak Ridge National Laboratory and El Capitan at Lawrence Livermore National Laboratory, integrating AMD EPYC processors to produce high-fidelity models. This will supply engineers with insights into how products like autonomous vehicles, aircraft and medical devices will virtually behave across millions of real-world operational scenarios.

“3rd Gen AMD EPYC processors provide leadership performance for HPC workloads and we’re incredibly excited to collaborate with HPE and Ansys to enable the HPC industry to run a fantastic combination of HPC, server infrastructure and simulation software to push the design envelope further than before,” said Forrest Norrod, senior vice president and general manager, Data Center and Embedded Solutions Business Group at AMD. “Working together, AMD and its technology partners are helping to drive HPC to new heights that will help tackle problems that have previously been beyond humanity’s reach.”

Modeling at exascale will empower engineers to analyze considerably more data in less time and solve extremely sophisticated design challenges.

“HPC and AI workloads are becoming more compute and data-intensive, requiring higher performance and specialized capabilities,” said Bill Mannel, vice president and general manager of HPC at HPE. “By combining Ansys’ software capabilities to target simulation goals with AMD’s powerful generation of EPYC processors, HPE is further optimizing systems to support business and research missions to improve accuracy in simulations and advance designs and models.”

AMD EPYC processors’ technological advancements enable engineering organizations of all sizes to solve demanding simulation workloads.

“AMD EPYC 7003 Series processors are helping Ansys customers provide improved time to value, enabling the quick creation of state-of-the-art designs that deliver fast answers and drive better decisions,” said Shane Emswiler, senior vice president at Ansys. “We look forward to future collaborations with AMD, which will explore how Ansys’s comprehensive suite of simulation solutions can be accelerated using new AMD EPYC processor technologies. This will empower engineering teams to accelerate innovation throughout their enterprise to build next-generation products and win the race to market.”

About Ansys

If you’ve ever seen a rocket launch, flown on an airplane, driven a car, used a computer, touched a mobile device, crossed a bridge or put on wearable technology, chances are you’ve used a product where Ansys software played a critical role in its creation. Ansys is the global leader in engineering simulation. Through our strategy of Pervasive Engineering Simulation, we help the world’s most innovative companies deliver radically better products to their customers. By offering some of the best and broadest portfolio of engineering simulation software, we help them solve the most complex design challenges and create products limited only by imagination. Founded in 1970, Ansys is headquartered south of Pittsburgh, Pennsylvania, U.S.A. Visit www.ansys.com for more information.


Source: Ansys

Subscribe to HPCwire's Weekly Update!

Be the most informed person in the room! Stay ahead of the tech trends with industy updates delivered to you every week!

IBM Research Debuts 2nm Test Chip with 50 Billion Transistors

May 6, 2021

IBM Research today announced the successful prototyping of the world's first 2 nanometer chip, fabricated with silicon nanosheet technology on a standard 300mm bulk wafer. With ~50 billion transistors, the chip will enab Read more…

Supercomputer-Powered CRISPR Simulation Lights Path to Better DNA Editing

May 5, 2021

CRISPR-Cas9 – mostly just known as CRISPR – is a powerful genome editing tool that uses an enzyme (Cas9) to slice off sections of DNA and a guide RNA to repair and modify the DNA as desired, opening the door for cure Read more…

LRZ Announces New Phase of SuperMUC-NG Supercomputer with Intel’s ‘Ponte Vecchio’ GPU

May 5, 2021

At the Leibniz Supercomputing Centre (LRZ) in München, Germany – one of the constituent centers of the Gauss Centre for Supercomputing (GCS) – the SuperMUC-NG system has stood tall for several years, placing 15th on Read more…

HPC Simulations Show How Antibodies Quash SARS-CoV-2

May 5, 2021

Following more than a year of rapid-fire research and pharmaceutical development, nearly a billion COVID-19 vaccine doses have been administered around the world, with many of those vaccines proving remarkably effective Read more…

Crystal Ball Gazing at Nvidia: R&D Chief Bill Dally Talks Targets and Approach

May 4, 2021

There’s no quibbling with Nvidia’s success. Entrenched atop the GPU market, Nvidia has ridden its own inventiveness and growing demand for accelerated computing to meet the needs of HPC and AI. Recently it embarked on an ambitious expansion by acquiring Mellanox (interconnect)... Read more…

AWS Solution Channel

FLYING WHALES runs CFD workloads 15 times faster on AWS

FLYING WHALES is a French startup that is developing a 60-ton payload cargo airship for the heavy lift and outsize cargo market. The project was born out of France’s ambition to provide efficient, environmentally friendly transportation for collecting wood in remote areas. Read more…

2021 Winter Classic – Coaches Chat

May 4, 2021

The Winter Classic Invitational Student Cluster Competition raged for all last week and now we’re into the week of judging interviews. Time has been flying. So as we wait for results, let’s dive a bit deeper into t Read more…

IBM Research Debuts 2nm Test Chip with 50 Billion Transistors

May 6, 2021

IBM Research today announced the successful prototyping of the world's first 2 nanometer chip, fabricated with silicon nanosheet technology on a standard 300mm Read more…

LRZ Announces New Phase of SuperMUC-NG Supercomputer with Intel’s ‘Ponte Vecchio’ GPU

May 5, 2021

At the Leibniz Supercomputing Centre (LRZ) in München, Germany – one of the constituent centers of the Gauss Centre for Supercomputing (GCS) – the SuperMUC Read more…

Crystal Ball Gazing at Nvidia: R&D Chief Bill Dally Talks Targets and Approach

May 4, 2021

There’s no quibbling with Nvidia’s success. Entrenched atop the GPU market, Nvidia has ridden its own inventiveness and growing demand for accelerated computing to meet the needs of HPC and AI. Recently it embarked on an ambitious expansion by acquiring Mellanox (interconnect)... Read more…

Intel Invests $3.5 Billion in New Mexico Fab to Focus on Foveros Packaging Technology

May 3, 2021

Intel announced it is investing $3.5 billion in its Rio Rancho, New Mexico, facility to support its advanced 3D manufacturing and packaging technology, Foveros. Read more…

Supercomputer Research Shows Standard Model May Withstand Muon Discrepancy

May 3, 2021

Big news recently struck the physics world: researchers at the Fermi National Accelerator Laboratory (FNAL), in the midst of their Muon g-2 experiment, publishe Read more…

NWChemEx: Computational Chemistry Code for the Exascale Era

April 29, 2021

A team working on biofuel research is rewriting the decades-old NWChem software program for the exascale era. The new software, NWChemEx, will enable computatio Read more…

HPE Will Build Singapore’s New National Supercomputer

April 28, 2021

More than two years ago, Singapore’s National Supercomputing Centre (NSCC) announced a $200 million SGD (~$151 million USD) investment to boost its supercomputing power by an order of magnitude. Today, those plans come closer to fruition with the announcement that Hewlett Packard Enterprise (HPE) has been awarded... Read more…

Arm Details Neoverse V1, N2 Platforms with New Mesh Interconnect, Advances Partner Ecosystem

April 27, 2021

Chip designer Arm Holdings is sharing details about its Neoverse V1 and N2 cores, introducing its new CMN-700 interconnect, and showcasing its partners' plans t Read more…

Julia Update: Adoption Keeps Climbing; Is It a Python Challenger?

January 13, 2021

The rapid adoption of Julia, the open source, high level programing language with roots at MIT, shows no sign of slowing according to data from Julialang.org. I Read more…

Intel Launches 10nm ‘Ice Lake’ Datacenter CPU with Up to 40 Cores

April 6, 2021

The wait is over. Today Intel officially launched its 10nm datacenter CPU, the third-generation Intel Xeon Scalable processor, codenamed Ice Lake. With up to 40 Read more…

CERN Is Betting Big on Exascale

April 1, 2021

The European Organization for Nuclear Research (CERN) involves 23 countries, 15,000 researchers, billions of dollars a year, and the biggest machine in the worl Read more…

HPE Launches Storage Line Loaded with IBM’s Spectrum Scale File System

April 6, 2021

HPE today launched a new family of storage solutions bundled with IBM’s Spectrum Scale Erasure Code Edition parallel file system (description below) and featu Read more…

10nm, 7nm, 5nm…. Should the Chip Nanometer Metric Be Replaced?

June 1, 2020

The biggest cool factor in server chips is the nanometer. AMD beating Intel to a CPU built on a 7nm process node* – with 5nm and 3nm on the way – has been i Read more…

Saudi Aramco Unveils Dammam 7, Its New Top Ten Supercomputer

January 21, 2021

By revenue, oil and gas giant Saudi Aramco is one of the largest companies in the world, and it has historically employed commensurate amounts of supercomputing Read more…

Quantum Computer Start-up IonQ Plans IPO via SPAC

March 8, 2021

IonQ, a Maryland-based quantum computing start-up working with ion trap technology, plans to go public via a Special Purpose Acquisition Company (SPAC) merger a Read more…

Can Deep Learning Replace Numerical Weather Prediction?

March 3, 2021

Numerical weather prediction (NWP) is a mainstay of supercomputing. Some of the first applications of the first supercomputers dealt with climate modeling, and Read more…

Leading Solution Providers

Contributors

Livermore’s El Capitan Supercomputer to Debut HPE ‘Rabbit’ Near Node Local Storage

February 18, 2021

A near node local storage innovation called Rabbit factored heavily into Lawrence Livermore National Laboratory’s decision to select Cray’s proposal for its CORAL-2 machine, the lab’s first exascale-class supercomputer, El Capitan. Details of this new storage technology were revealed... Read more…

AMD Launches Epyc ‘Milan’ with 19 SKUs for HPC, Enterprise and Hyperscale

March 15, 2021

At a virtual launch event held today (Monday), AMD revealed its third-generation Epyc “Milan” CPU lineup: a set of 19 SKUs -- including the flagship 64-core, 280-watt 7763 part --  aimed at HPC, enterprise and cloud workloads. Notably, the third-gen Epyc Milan chips achieve 19 percent... Read more…

African Supercomputing Center Inaugurates ‘Toubkal,’ Most Powerful Supercomputer on the Continent

February 25, 2021

Historically, Africa hasn’t exactly been synonymous with supercomputing. There are only a handful of supercomputers on the continent, with few ranking on the Read more…

New Deep Learning Algorithm Solves Rubik’s Cube

July 25, 2018

Solving (and attempting to solve) Rubik’s Cube has delighted millions of puzzle lovers since 1974 when the cube was invented by Hungarian sculptor and archite Read more…

GTC21: Nvidia Launches cuQuantum; Dips a Toe in Quantum Computing

April 13, 2021

Yesterday Nvidia officially dipped a toe into quantum computing with the launch of cuQuantum SDK, a development platform for simulating quantum circuits on GPU-accelerated systems. As Nvidia CEO Jensen Huang emphasized in his keynote, Nvidia doesn’t plan to build... Read more…

The History of Supercomputing vs. COVID-19

March 9, 2021

The COVID-19 pandemic poses a greater challenge to the high-performance computing community than any before. HPCwire's coverage of the supercomputing response t Read more…

HPE Names Justin Hotard New HPC Chief as Pete Ungaro Departs

March 2, 2021

HPE CEO Antonio Neri announced today (March 2, 2021) the appointment of Justin Hotard as general manager of HPC, mission critical solutions and labs, effective Read more…

Microsoft to Provide World’s Most Powerful Weather & Climate Supercomputer for UK’s Met Office

April 22, 2021

More than 14 months ago, the UK government announced plans to invest £1.2 billion ($1.56 billion) into weather and climate supercomputing, including procuremen Read more…

  • arrow
  • Click Here for More Headlines
  • arrow
HPCwire